|
Product Details:
Contact Now
Chat Now
|
| Forming Type: | Cold Forming, Seamless ASME Elliptical Heads | Manufacturing Standards: | ASME, PED/EU, DIN28011, DIN28013, GB/T. |
|---|---|---|---|
| Material: | SA-240M 304L, Other Material Is Available Upon Your Request. | Custom Order: | Accepted. |
Stainless Steel Seamless ASME Elliptical Heads from China Factory
1.Specifications of ASME Elliptical Heads:
| Specifications of ASME Elliptical Heads | |
| Diameter | 1650mm, Seamless. Other diameters are available upon your request. |
| Nominal Thickness | 6mm, other thickness are available upon your request. |
| Minimum Thickness | 5mm, 4.7mm, |
| Material | SA-240M 304L, other material is available upon your request. |
| Forming Type | Cold Forming, Weld-Free ASME Elliptical Heads |
| Manufacturing Standards | ASME, PED/EU, DIN28011, DIN28013, GB/T. |
| Custom Order | Accepted. |
| Certificates | ISO, PED, ASME. |
![]()
2.Certificates of ASME Elliptical Heads:
Stainless Steel Seamless ASME 2:1 Elliptical Heads Fabricated by Henan Guojiang Precision Formed Head Co., Ltd. Diameter 1650mm, 1700mm ASME Elliptical Heads is Formed from a Single Plate with no Welded Joints, So there is no seam to inspect, no heat affected zone and no weld distortion.
The 2:1 ASME Elliptical Head Fabricated under the Manufacturing Standards of ASME, PED, ISO Certificates. with Available Manufacturig Standards Including ASME, PED/EU, DIN 28011, DIN 28013, GB/T. and Other Manufacturing Codes are available upon your request.
![]()
3. About Us--Henan Guojiang Precision Formed Head Co., Ltd.
Henan Guojiang Precision Formed Head Co., Ltd. as One of the Leading Manufacturers of Seamless Stainless Steel ASME Elliptical Heads with Diameters up to1650mm, 1700mm.
Seamless means the ASME Elliptical Head is Formed as one Continuous Piece of Plate, no Petal Segments, no longitudinal weld, no Weld Seam in the Crown or Knuckle. there is no fusion line to radiograph.
![]()
![]()
4. Traceability of ASME Elliptical Heads Manufacturer by Henan Guojiang Precision Formed Head Co., Ltd.
Stainless Steel Seamless ASME Elliptical Heads Fabricated by Henan Guojiang Precsion Formed Head Co., Ltd are 100% Traceablility with Production ID via our Order Management System.
Every Piece of ASME Elliptical Head is Manufactured under a Documented Process Control. Before Start Forming, our Technical Department Issues a Production Sheet for that Specific ASME Elliptical Head: The Process Route, Forming Parameters, Inspection Points and Acceptance Values. The Production Sheet Carries a Production ID, which is the thread that ties the head to its plate heat number, Its Forming Records, and the QC Inspection Values and Recorded all the inspection numbers on Quality Documentation and Provuded to all of our Customers.
Every Step is Signed by the Responsible Operator when it is Completed, the Signatureis not Accepted as proof on its own, Our QC Inspection Department will Verifies is the Value Recorded beside it: The THickness Measured, the Profile Checked, the Parameter Set, if a Step Does not Match the Sheet, It is Corrected before the head Moves on, not after.
Once the head is finished, it passes a final QC inspection, and its production ID carries the record end to end — from plate heat number, through forming and inspection values, to the certificate issued with the shipment.
![]()
![]()
5. Frequently Asked Questions:
Q: Do you Make Seamless Stainless Steel ASME Elliptical Heads? What is the Max Dimater withou Weldling Joints?
A: Yes, we do make the Seamless Stainless Steel ASME Elliptical heads, the Diameters without welding joints up to 1700mm. That is mean Seamless ASME Elliptical Heads & Seamless ASME Torispherical Heads with max diameter up to 1.7 meters.
Q: Do you supply a Straight Flange (SF), and How long?
A: Yes, SF Length is per your drawing, according to your request. Typically 25-50mm for Standard Vessel Welding, Loner where Nozzles, manways or site fit-up required it.
Q: Do you Supply ASME Elliptical Heads with a Joggled Edge?
A: Yes, Our Factory Supply the Joggled Edge with Max Diameter up to 2.6Meters of Elliptical Heads & Torispherical Heads. We also supply Beveling, Edge Trimming, Laser Drilling, Pickling, Surface Treatment, Polishing, Mirror Polishing, and Heat Treatment, etc.
Q: Codes, Standards and Certificates of the ASME Elliptical Heads?
A: ASME, PED/EU, DIN28011, DIN28013, GB/T. Our Factory Certified with ASME, PED, ISO Certificates.
Q: Do you Accept Third-Party Inspection?
A: Yes, Third Party Inspection Accepted. We are Certified with ASME, and PED Certificates.
Contact Person: Lynn Chen
Tel: +86 15037307289