China Manufacturer of Sanitary Tank Heads — ASME & PED Compliant, 304/316L
1.Specifications of ASME Sanitary Tank Heads:
| Specifications of ASME Sanitary Tank Heads |
| Inner Diameters |
316L 1700mm (Seamless, Weld-Free) Other Diameters are available upon your request. |
| Nominal Thickness |
6mm, other thickness are available upon your request. |
| Minimum Thickness |
4.7mm |
| Surface Treatment |
Pickling, Mill Finish, Polishing, Mirror Polishing. upon your request. |
| Manufacturing Code |
ASME, PED/EU, DIN28011, DIN 28013, GB/T. |
| Certificates |
PED & ASME |
| Custom Order |
Accepted. |
2. About Us--Henan Guojiang Precision Formed Head Co., Ltd.
ASME Sanitary Tank Heads Manufactured by Henan Guojiang Precision Formed Head Co., Ltd.
Mirror Polished to RA≤ 0.8 μm, with radiused internal transitions and no Dead Zones which is easily to clean.
(1). We are one of Leading Manufacturers in China, We are Specialized in Production of ASME Tank Heads with Different Shapes and Sizes.
(2). Our Factory Certified with ISO, ASME & PED Certificates.
(3). 100% Traceability of ASME Sanitary Tank Heads Fabricated by our Factory via our Order Management System.
(4). Quality Certificate will be Provided to all or ouf Customers, Including Mill Test Certificates (EN 10204 3.1 Certificate), QC Inspection Recorded Documentation, Partial Testing Datas.
(5). Custom Order--We can Accept Kinds of Custom Orders with Different Shapes and Sizes.
3. Certificates of ASME Sanitary Tank Heads:
Henan Guojiang Precision Formed Head Co., Ltd. Certified with ISO, ASME & PED Certificates.
Our Factory Adopted Available Manufacturing Standards Including ASME, PED/EU, DIN28011, DIN28013, GB/T Codes.
| Certification |
| GB/T 25198-2023 |
| ASME BPVC Sec.VIII Div 1 |
| PED (Pressure Equipment Directive) |
| ISO 9001:2015 |
| ISO 14001:2015 |
4. Applications of ASME Sanitary Tank Heads:
ASME Sanitary Tank Heads Fabricated in our Factory According to ASME Section VIII DIV.1 Standards, Typical Applications Include Food Processing, Beverage and Brewing, Dairy, Pharma and Biotech Production, Water Treatmen and Purification, Chemical and Milk Industry, etc.
5. Frequently Asked Questions (FAQ):
Q: Can you Supply ASME U-Stamp?
A: We Manufacturer to ASME VIII-1 Requirements and Provide Full Material Traceability and NDT Records. and U-Stamp is Available with Third Party Inspection.
Q: What is your Minimum Order Quantity?
A: One Piece for Standard Size is Available. A Single Cryogenic Pressure Vessel Heads can be Ordered without Tooling Cost.
If Non-Standard Diameters or Knuckle Radius Requirement, then New Tooling will be Charged, If you order the same size again later, you pay nothing for it a second time.
Q: How is Traceability Maintained?
A: Every ASME Cryogenic Pressure Vessel Heads Manufactured by our Factory, with a Production ID Number Used for Full Traceability via our Order Management. And Quality Certificate will be Provided to all our Customer, Including Mill Test Certificates, Including EN 10204 3.1 Certificate and Furnace Heat Number Used for Raw Materials Traceability.
Q: Available Manufacturing Standards?
A: ASME, PED/EU, DIN 28011, DIN 28013, GB/T.
Q: Do you Strictly Follow The Lead Time?
A: Yes, 100% Strict Follows the Lead Time, and We will tell the Lead Time to our Customers before Order Placement.
Q: Do you Supply Mill Test Certificate EN 10204 3.1 Certificates?
A: Yes, EN 10204 3.1 Certificates 100% Provided to all of our Customers.
Your message must be between 20-3,000 characters!
