|
Product Details:
Contact Now
Chat Now
|
| Forming Type: | Cold Forming | Custom Order: | Accepted. |
|---|---|---|---|
| Manufacturing Standards: | ASME VIII-1 2025ED | Material: | SA-240M 304L, Other Material Available As Your Request. |
ASME Section VIII SA-240M Stainless Steel 2:1 Elliptical & Torispherical Pressure Vessel Heads
ASME Section VIII 2:1 Elliptical & Torispherical Pressure Vessel Heads Manufactured in Henan Guojiang Precision Formed Head Co., Ltd. with Strictly Quality Control System Start from Material Purchasing, Laser Blanking, Edge Cutting, CNC Trimming, Laser Drilling, Pickling, Solution, Heat Treatment, Polishing, Mirror Polishing, to QC Inspection.
Our Factory Certified with ISO, ASME, PED Certificates, the Quality Level Meets Global Market Requirements.
For customers with stringent tolerance requirements, our technical team will first assess feasibility to confirm whether we can meet the specified tolerance criteria. If feasible, the team will issue a production guidance sheet stating the tolerance requirements. All production processes shall follow these standards, up to final QC inspection.
![]()
| Specifications of ASME Section VIII Heads | |
| Diameter | 1325mm, other diameters are available as your request. |
| Nominal Thickness | 8mm, other thickness are available as your request. |
| Minimum Thickness After Forming | 7.1mm |
| Material | SA-240M, 304L. Other material is available as your request. |
| Manufacturing Standards | ASME VIII-1 2025ED. Others available upon your request. |
| Surface Treatment | Mill Finish, Pickling, Polishing, Mirror Polishing. |
| Custom Order | Accepted. |
![]()
Our Factory is Certified with ASME, PED, ISO Certificates.
Available Manufacturing Codes: ASME, PED/EU, DIN28011, DIN28013, GB/T.
| Certification Standards |
|---|
| GB/T 25198-2023 |
| ASME BPVC Sec.VIII Div 1 |
| PED (Pressure Equipment Directive) |
| ISO 9001:2015 |
| ISO 14001:2015 |
![]()
Every ASME Section VIII head made in our works is controlled against a production sheet issued by our technical department, and that sheet carries the head's production ID from the moment the order is released. The ID is not applied after the fact: it is assigned before production starts, and it links the plate heat number, the forming parameters, the measured values at each stage and the final inspection report to that one piece. Control runs the whole route — material purchasing, laser blanking, edge cutting, CNC trimming, laser drilling, forming, beveling, joggling, heat treatment where specified, pickling and polishing — with each stage signed by the responsible operator and verified by QC department.
At the End of the Production, QC Carrries out the final inspection and records every measured value on the inspection report issued with the shipment. So the Customer receives a documented set of actual figures rather than a statement of conformity.
![]()
![]()
ASME Section VIII Heads Serve a Wide Range of Applications on Different Tanks, Pressure Vessels and Non-Pressure Equipments.
(1). Stainless Steel ASME Section VIII Heads are Widely Adopted in Brewing, Food, Beverage, Water, etc. Sanitary Vessels.
(2). And Clean Industry Demand like Chemical Processing Tanks, Water Treatment System, and Some Clean Mixing Tanks, etc.
(3). Other Industry like Dust Collection Silos, Bulk Material Hoppers, and Custom Industrial Machinery.
(4). ASME Section VIII Heads Used in Oil and Gas Industry, like: Petrochemical Industry, Natural Gas Storage Vessels, and Oil Pressure Vessels, etc.
![]()
![]()
Q: Is Fully Traceability available for ASME Section VIII Heads?
A: Yes, Our Order Management System Assigns Unique Production ID, Every Manufacturing Step is Inspected and Signed off by the Responsible Person. the Production ID used for Traceability of ASME Section VIII Heads with ASME Code Fabricated in our Factory.
Q: What SIze Range Can you Produce for ASME Section VIII Heads?
A: For ASME Section VIII Heads with ASME Code, Diameter Range from 76mm to 5200mm, 7000mm, and Thickness from 2mm to 35mm with Cold Formed.
Heavier wall and larger diameters are formed by hot forming
Q: What Surface Treatments Can you Offer for ASME Section VIII Heads?
A: Pickling, Mill Finish, Polishing, Sanitary Polishing, Mirror Polishing. Upon your Request.
Other In-House Processing Capabilities Including: Laser Blanking, Forming, Edge Trimming, Lasder Drilling, Beveling, Joggling, Pickling, Polishing, Mirror Polishing, Solutions, Heat Treatment, etc.
Q: Can you Provde Material Certificates?
A: Yes, EN 10204 3.1 Material Test Certificates are Supplied for Every Order. The Documents Contain Furnace Heat Numbers to Guarantee Full Raw Material Traceability.
Q: What is your Lead Time?
A: Lead time depends on Material Availability, Size, Thickness, Surface Finish and Inspection Requirements. Normally It will cost around 10-20 Days, We can Calculate the Lead Time by our Order Management System, and we will tell our Customer Lead Time before Order Placement.
Q: Available Manufacturing Code?
A: Our Factory Adopted Available Manufacturing Code: ASME, PED/EU, DIN28011, DIN28013, GB/T.
Contact Person: Lynn Chen
Tel: +86 15037307289