ASME Cryogenic Pressure Vessel Heads Manufacturer, SA-240M 304L Stainless Steel
1.ASME Cryogenic Pressure Vessel Heads Specifications:
| ASME Cryogenic Pressure Vessel Heads Specifications |
| Inner Diameters |
1500mm (Seamless), other diameters are available upon your request. |
| Nominal Thickness |
6mm, other thickness are available upon your request. |
| Minimum Thickness |
5mm |
| Surface Treatment |
Pickling, Mill Finish, Polishing, Mirror Polishing. |
| Manufacturing Standards |
ASME, PED/EU, DIN28011, DIN28013, GB/T. |
| Custom Order |
Accepted. |
2. ASME Cryogenic Pressure Vessel Heads Certificates:
ASME Cryogenic Pressure Vessel Heads Fabricated by our Factory, Certified with ASME & PED Certificates.
Available Manufacturing Code Including: ASME, PED/EU, DIN 28011, DIN 28013, GB/T Standards.
Every Piece of ASME Cryogenic Pressure Vesesl Heads is made within the Tolerance Limits of the Applicable Code, and Where your specification demands Tighter Tolerances than the Code Allows.
Where your Specification Calls for Tolerances Tighter than the Govering Code, please state the rquired values on the Drawing or in the Enquiry, Dimension, Required Tolerance, and the Measurement Method you will use for Acceptance. Our Technical Department will Review Feasibility against the Size, Thickness, Material and Forming Method, and Confirm in Writing the Value we Can hold Before Production Starts.
3. ASME Cryogenic Pressure Vessel Heads Quality Control:
(1). EN 10204 3.1 Certificates Provided to All of our Customers.
(2). 100% Traceabile of ASME Cryogenic Pressure Vessel Heads Manufactured by our Factory. with Production ID Number via Order Management System.
(3). Qualtiy Certifief will be offered to every Order, Including Mill Test Certificated, QC Inspection Records Documents, and Partial Testing Data, UG-79, UG-81, etc.
(4). We can Tell Lead Time Clearly before Order Placement, Depends on our Order Management System.
(5). Signed at Every Stage, Verified by QC, Released only After Final Inspection — with a Named and Dated Signature Behind Each Step.
4. About Us--Henan Guojiang Precision Formed Head Co. Ltd.
We are one of Leading Manufacturers of ASME Cryogenic Pressure Vessel Heads with Stainless Steel in China, We are Certified with ISO, ASME & PED Certificates.
Because of our Factory Owns Very Strong Technical Team, we can accept kinds of custom Order with Various Size and Shapes.
5. Frequently Asked Questions (FAQ):
Q: What is your Minimum Order Quantity?
A: One Piece for Standard Size is Available. A Single Cryogenic Pressure Vessel Heads can be Ordered without Tooling Cost.
If Non-Standard Diameters or Knuckle Radius Requirement, then New Tooling will be Charged, If you order the same size again later, you pay nothing for it a second time.
Q: How is Traceability Maintained?
A: Every ASME Cryogenic Pressure Vessel Heads Manufactured by our Factory, with a Production ID Number Used for Full Traceability via our Order Management. And Quality Certificate will be Provided to all our Customer, Including Mill Test Certificates, Including EN 10204 3.1 Certificate and Furnace Heat Number Used for Raw Materials Traceability.
Q: Available Manufacturing Standards?
A: ASME, PED/EU, DIN 28011, DIN 28013, GB/T.
Q: Can you Supply ASME U-Stamp?
A: We Manufacturer to ASME VIII-1 Requirements and Provide Full Material Traceability and NDT Records. and U-Stamp is Available with Third Party Inspection.
Q: Do you Supply Mill Test Certificate EN 10204 3.1 Certificates?
A: Yes, EN 10204 3.1 Certificates 100% Provided to all of our Customers.
Q: Do you Strictly Follow The Lead Time?
A: Yes, 100% Strict Follows the Lead Time, and We will tell the Lead Time to our Customers before Order Placement.
Your message must be between 20-3,000 characters!
